Toyota Port-Installed and Dealer-Installed Keyless Entry Remotes with FCC ID ELVATDC

There seems to be lots of confusion about port-installed and dealer-installed keyless entry systems used on Toyota vehicles in North America. Several different systems have been used. Among the most common are systems for which the original remote has FCC ID ELVATDC on the back.

Audiovox/Code Alarm supplied Toyota with two systems for port or dealer installation that used remotes with FCC ID ELVATDC. Keyfobs for one system have a green LED light; those for the other system have a red LED light. These two remotes are not interchangeable. Both of the original key fobs have been discontinued, but Remotes Unlimited sells replacement transmitters for both of them.

If your remote has a red LED, the correct replacement remote is our part 495-1495. You can see the original part and the replacement at this link:
Remote 495-1495

If your remote has a green LED, the correct replacement remote is our part 092-6435. You can see the original part and the replacement at this link:
Remote 092-6435

Both of these keyfobs have different FCC IDs than your original remote, but they should work for your system if you select based on the color of the LED light on your original remote. The system in your vehicle is user-programmable. Programming instructions and free phone tech support are included with purchase.

Bookmark and Share:
This entry was posted in Aftermarket Alarm System Remote, Aftermarket Remote Control, Car Remote, Car Remote Programming, Key Fob, Keyfob, Keyless Remote. Bookmark the permalink.

Comments are closed.